To order the product, contact the number below.

021-22855818

Gate valve OSY brand WEFLO

Size (inches): 2″ to 12″ and 14″ to 24″.

Maximum working pressure: 300 psi

Product name: OSY shut off valve

Manufacturer: WEFLO

Product code: SLS4090

OSY gate valve is one of the fire extinguishing equipments that is marketed by Manasanat Taybar firefighting equipment manufacturing company. They are used only to control and block the fluid flow. In cases where direct flow is required, it cannot be used, because it is a two-way valve. The OSY gate valve allows the fluid to flow in any direction needed and has many uses during firefighting. The osy valve is one of the types of industrial valves that are used to stop and open the flow of liquids. This type of valve has a structure that provides the possibility of stopping the flow of liquids accurately and with control. These valves are used to control the flow of water, gas, oil and other industrial liquids. These valves are used in various industries, including oil, gas, chemical, water and sewage industries, due to their ability to accurately control flow and stability in performance. Due to the importance and efficiency of these valves in various industries, the selection and use of OSY gate valve is a vital matter to carry out industrial operations correctly and safely.

Gate valve OSY

The term OSY stands for “outside stem and yoke” or “outside screw and yoke”. In this faucet model, there is a long and narrow rod that is connected to the handle (Handwheel) on the top of the valve on one side and to the slide (Gata) on the other side. When you close the valve, the handwheel is on top of the threaded stem. By turning the handwheel counter-clockwise, the stem moves up and the valve opens. When the valve is open, if you turn the handwheel clockwise, the stem moves down and the valve closes. The main difference between normal valves and OSY shut-off valves is the ability to visually detect whether the valve is open or not. The most important point in fire extinguishing networks is that the network is ready to work and that the valve is not closed during operation. If you close the OSY valves, the middle rod will be inside the valve. Also, if you leave the valve open, the middle rod will come out of the valve.