Testing each valve in the hydrostatic testing machine takes approximately 2 minutes.
As a result, you will be able to test 20 taps per hour, which is equal to 160 taps per work shift.
The hydrostatic test device is for special tests that are performed on equipment such as industrial valves, especially fire valves, and examines their durability and leakage. In simple terms, this test determines for us whether the desired part can work under its rated pressure or not. Hydrostatic testing machine is a very important equipment in various industries such as oil and gas industry, chemical industry and construction industry. This device is used to perform pressure and strength tests of structures and equipment. The hydrostatic test is performed in such a way that the pressure of water or other liquid is applied to the examined boundary, and then the pressure and strength of the structure or equipment under test is measured. This test is used as one of the main methods to evaluate the safety and performance of structures and equipment. The use of hydrostatic testing device is considered as one of the main methods of evaluating the quality and safety of industrial products. This device allows users to accurately and reliably measure and evaluate the pressure and strength of their products. The expansion of the use of various equipment such as pressure pipes prompted people to perform various tests to deal with the possible dangers of this equipment. One of these tests is the hydrostatic test, which is used to check the performance, durability, and leakage test of equipment such as cylinders (gas cylinders and fire extinguisher cylinders), boilers, pressure pipes, industrial valves, etc.
Hydrostatic test includes leakage and body test. In the leakage test, according to the standard, the part in question is pressurized to a percentage higher than the working pressure in order to determine its possible leakage rate. In the body test, the part is tested up to 50% higher than the working pressure to determine the strength of the body. To test the milk, the desired milk is placed on the milk testing table. To do this, tight fasteners are used to prevent the valve from moving during the test. Then, testing is done to ensure the performance of this type of valves. Therefore, gas or liquid pressure enters the disk through the inlet nozzle and the pressure gauges on the valve test table measure the pressure. When the pressure exceeds the specified limit, the valve opens to release the excess pressure. At this stage, the pressure can be read through pressure gauges.
Testing each valve in the hydrostatic testing machine takes approximately 2 minutes. As a result, you will be able to test 20 taps per hour, which is equal to 160 taps per work shift.
